Rubber ball to open and close all types of screw-down
Rubber ball to open and close all types of screw-down case backs.
Inflated rubber ball to open and close all types of screw-down case backs. Inexpensive, easy-to-use this case opener allows most watches to be opened and will not leave marks. Ø 67 mm.
ASSORTMENT OF STEEL DIES TYPE BR, 6 PIECES / Ø 34…38 mm
ASSORTMENT OF STEEL DIES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE BR, 6 PIECES / Ø 34 - 35 - 35.5 - 36 - 37 - 38 mm
Universal brass tool to remove glasses from Ø 10 to 45
Universal brass tool to remove glasses from Ø 10 to 45 mm, delivered with standard plate, 0.70 mm thickness
Reference : 4266
Swiss made Top seller
Removes and inserts immediately, crystals without dis-assembling the watch.
Will not damage the crystal.
For any unbreakable crystal without tension ring.
Useful for removing immediately a watch glass for:
- replacing the glass
- steam removing
- getting at the hands.
STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH
STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, Ø INT. 30.60 / Ø EXT. 40 mm
RACK-PRESS FOR OPENING/CLOSING CASES
RACK-PRESS FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, VERSION RED SUCTION DIES
The press is equipped with two handles that can be declutched to facilitate their positioning according to the desired angle :
(1) Lateral handle allows to lower or to lift the toothed rack in order to have a better control of the pressure applied to the
case back during unscrewing/screwing ;
(2) Upper handle (mobile) is used to unscrew/screw the case back.
Compatible with all HOROTEC® dies and case holders, see pages 07-25...07-28 and 07-30...07-32.
The press is equipped with two handles that can be declutched to facilitate their positioning according to the desired angle :
(1) Lateral handle allows to lower or to lift the toothed rack in order to have a better control of the pressure applied to the
case back during unscrewing/screwing ;
(2) Upper handle (mobile) is used to unscrew/screw the case back.
Contents :
07.367-P Rack-press 4.000
07.367-A (3) Red suction case holder 0.130
07.333 (4) Assortment of 7 red suction dies 0.140
Spare part :
07.367-R Lateral spring for press, Ø 18 x H 13 mm 0.005
STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH
STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, Ø INT. 35.55 / Ø EXT. 45 mm
PIN PUNCH SUPPORT FOR PRESSES MSA07.367 /07.368 /.07.36
PIN PUNCH SUPPORT FOR PRESSES MSA07.367 /07.368 /.07.369, STAINLESS STEEL / Ø 8 x L35 mm
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, CARBON COLO
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
MINI-PRESS WITH WHEEL FOR OPENING/CLOSING CASES WITH SC
MINI-PRESS WITH WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, CARBON COLOUR
Mini professional precision press. Small and robust, built in steel and aluminium.
Equipped with removable and adjustable watch holder with 4 Delrin® dies to hold the watch cases surely and horizontally.
First fit the case in the watch holder and then unscrew the case back with the adjustable jaws holder.
Excellent frontal, lateral or plunging view.
Top wheel Ø 75 mm.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 gasket for broach MSA07.320-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH S
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, CARBON COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH S
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, GRAFFITI COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, GRAFFITI CO
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, GRAFFITI COLOUR
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, MAGMA COLOU
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, MAGMA COLOUR
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH S
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, MAGMA COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
Professional precision press, heavy and robust for open
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1Adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
Small sized press, suitable for screw-on and snap-on di
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, WITH 12 SCR
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, WITH 12 SCREW-ON DIES MSA07.104 / USE WITH SNAP-ON DIES + SUPPORT FOR CLOSED BAND MSA07.160-A