Table micromotor set MAXIMA PHP 40.
The compact control unit MSA20.381-02 is a continuously variable speed
controller (0…40’000 rpm).
Handpiece with "One-Touch" quick system.

Badeco riveting inserts assortment

Material:
All tips are made of hardened silver steel (except 4 ref.) and consist of high-alloy steel with 17% silver.
The special feature of this material is:
- Its hardness resembles a hard metal.
- Its silver content facilitates polishing

Hardness - Polishing:
Each tip is manually bleached to obtain a polished tip.
This gives it a high hardness and purity. The quality of these tips is not comparable to those normally made of hardened steel without specification.
The wear of the BADECO is much slower when striking. However, these tips remain very affordable.

Tempering:
Performed at high frequency, only on the striking area. Therefore breakage is rare and longer use.

Automatic extraction:
In case of a broken tip in the hammer, the problem of extraction is always difficult. Here the points for automatic extraction after breakage have been studied.
This saves time and prevents the hammer from being sent for repair.

Set of 9 hardened inserts
Material: hardened silver steel

Content:
Rivet insert round smooth Ø 0.5 mm (Ref. 240.050)
Rivet set round smooth Ø 1.0 mm (Ref. 240.100)
Rivet insert round smooth Ø 2.1 mm (Ref. 240.210)
Rivet insert square smooth 1.0 x 1.0 mm (Ref. 244.100)
Rivet insert square smooth 1.6 x 1.6 mm (Ref. 244.160)
Rivet insert oval grooved 2.1 x 1.2 mm (Ref. 246.210)
Rivet insert rectangular smooth 0.5 x 1.0 mm (Ref. 248.100)
Rivet insert rectangular smooth 0.8 x 1.5 mm (Ref. 248.150)
Rivet insert rectangular smooth 1.2 x 2.5 mm (Ref. 248.250)

Fine to very fine hammer engraver
318 SP hammer to be screwed onto a DC RS2000 micromotor for very high precision and regular striking from fine to very fine for M4ASF2, MX STRONG, MX4 EVOLUTION, MX4 TOUCH EVOLUTION.

4 adjustable force levels from fine to very fine
Delivered with roughing point Ø 4 mm, ref 240000 in unhardened steel-silver to finish

Nano Handpiece 460 2nd version 2022

The most beautiful handpiece in the world

Only with Nanomoteur (RS3000V – RS3000SP – P3000 – E3000)

318 SP hammer to be screwed onto a DC RS2000 micromotor for very high precision and regular striking from fine to very fine for M4ASF2, MX STRONG, MX4 EVOLUTION, MX4 TOUCH EVOLUTION.

4 adjustable force levels from fine to very fine
Delivered with roughing point Ø 4 mm, ref 240000 in unhardened steel-silver to finish

New model 'MX-2 Carbon OLED

The MX-2 was originally intended as the replacement model for the MX-1, but is now available alongside the MX-1.
Unlike the MX-1, the MX-2 has a second motor output and is equipped with a digital speed display. The MX-2 also impresses with around 15% more power, a memory system for the operating mode and speed programming. It also enables the reproducibility of work settings even when switching from one workstation to another. At the same time, it is just as compact as the MX-1.

The powerful Badeco RS2000 carbon fibre micromotor (Ref.no. 4585.RS2000) is designed for reliability and efficiency. With a high torque at low rotation speeds, it is the perfect tool for drilling and setting stones.

The quick-action handpiece # 465 made of carbon and stainless steel allows a quick change with ¼ turn without having to stop the motor. The handpiece offers double protection against dust, dirt and abrasive substances and guarantees high concentricity < 0.015 mm.

Kit consisting of:

Badeco MX2 control unit

Badeco RS2000 power micromotor 180 W

Badeco quick-action handpiece # 465 incl. collet Ø 2.35 mm

Vario foot pedal PC800

Motor support MX for table mounting (Base available separately)

Handpiece holder

Mains plug



Optional to use with:
Handpiece No. 380
Handpiece No. 388
Rivetting and setting mallet No. 318 Combi
Rivetting and setting mallet No. 318 SP fine stroke
Filehandpiece No. 4LC100

Technical specifications
Brand:Badeco
Diameter collet (mm):2.35
Footswitch operation:Vario
Frequency (Hz):50/60
Number of connections:2 ports
Rotational speed (rpm):2.000 - 20.000
Rotation direction:clockwise, counterclockwise
Speed control:stepless
Voltage (V):230
Weight motor/ handpiece (g):82

Nanomotor set MX-4 TOUCH Evolution LCD nano SP “Jewelry” + HP 460 + PC800

Micro-motor DC

Carbon high protection

RS3000SP = Special low speed and high torque 12’500rpm

New Carbon Fiber Nano for high torque 90W – 65gr

Diameter 17mm x 40mm and 65gr. !!

minimum 1’500 rpm to 12’500 rpm

ultra short and ultra light

Badeco MX-1 Strong kit: RS2000 power micromotor,

The Badeco MX1 Carbon control unit is small, light, handy and yet powerful and therefore particularly suitable for micromotors with high torque up to 20.000 Upm. It has one micromotor connection and automatically saves the speed for both manual control and control via foot pedal.

The powerful Badeco RS2000 carbon fibre micromotor (Ref.no. 4585.RS2000) is designed for reliability and efficiency. With a high torque at low rotation speeds, it is the perfect tool for drilling and setting stones.

The quick-action handpiece # 465 made of carbon and stainless steel allows a quick change with ¼ turn without having to stop the motor. The handpiece offers double protection against dust, dirt and abrasive substances and guarantees high concentricity < 0.015 mm.


Kit consisting of:
Badeco MX1 control unit
Badeco RS2000 power micromotor 180 W
Badeco quick-action handpiece # 465 incl. collet Ø 2.35 mm
Vario foot pedal PC800
Motor support MX for table mounting (Base available separately)
Handpiece holder
Mains plug

The JURA Graver PLUS is a revolutionary all-in-one pneumatic engraving system with a built-in brushless E-type micromotor, offering unrivalled precision and efficiency for diamond setting and manual engraving.

Operating without an external compressor, this compact system delivers consistent, precise lines, from deep metal engraving to fine chiselling, while reducing noise and clutter in your workspace. The next-generation engraving handpiece allows for engraving, hammering and filing, ensuring optimal control and versatility.

Equipped with a powerful and quiet E-type micromotor, the fine paving handpiece is specially designed for micro diamond setting, offering an ergonomic grip to minimise hand fatigue during extended sessions. The included tabletop handpiece holder prevents cable strain and damage, keeping your workspace organised.

Designed for professionals and beginners alike, the Juratools Graver PLUS is the ideal solution for flawless precision in diamond engraving and setting, ensuring a smooth and efficient workflow.

Power supply: The control unit supports dual voltage (100-240 V, 50/60 Hz), making it compatible for international use.

Scope of delivery:
All-in-one control box and 2 foot pedals
Micromotor handpiece - Slim Fit Pavé (3798.EQ1401)
Table mount for micromotor (3798.SU02)
Engraving handpiece - New generation (3798.EQGHNG)
Universal holder (3798.SU01)
Set of 10 quick changers (Ø 2.35 mm) (3798.EQGHQC23)
Set of 5 carbide burr blanks (Ø 2.35 mm) (3798.CGBL23)


Weight: 9 kg