PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, CARBON COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.

Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, GRAFFITI COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.

Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth

PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, GRAFFITI COLOUR

Small sized press, suitable for screw-on and snap-on dies.

Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, MAGMA COLOUR
Small sized press, suitable for screw-on and snap-on dies.

Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, MAGMA COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.

Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

Small sized press, suitable for screw-on and snap-on dies.

Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity

PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, WITH 12 SCREW-ON DIES MSA07.104 / USE WITH SNAP-ON DIES + SUPPORT FOR CLOSED BAND MSA07.160-A

REVERSIBLE SCREW-ON DIE FOR FITTING VERY DOMED CRYSTALS, Ø 30 mm

Rubber red ball to open and closed all types watch's case backs, Ø 67 mm

Rubber red ball to open and closed all types watch's case backs, Ø 67 mm

UNIVERSAL STAKE FOR SCREW-DOWN CASE-BACKS
Closing and opening
THANKS to its adhesion, this stake is suitable for all types of case-back. So it will replace all dedicated stake panels



This stake's 2 main assets are the excellent adhesion of the sphere, as well as the adjustable stop used to optimise the contact surface on the case-backs.



This adhesion, associated with a maximum contact surface, makes it possible to screw the case-backs to the final tightening torque. To do so, it is preferable to mount the stake on a press combining vertical movement (ideally a rack or motorised press) with rotation. This enables you to apply a controlled axial force, while applying a rotational movement i.e. tightening.



To optimise the stake's adhesion, you can clean the sphere with clear water, or with an alcohol wipe.

Reversible Stake Under with Straight Edges in Metal for press tool Ø 34/36 mm

Reversible Stake with Straight Edges in Metal for press tool, Ø 50/52 mm

Assortment of 8 suction dies in steel for screwed case
Reference : 15700-CO
High-grip suction pads for opening?/?closing screwed case-backs. The material deforms slightly and adapts to the shape of the case.
Dies and subbase made of aluminium with soft adiprene suction pad. Ø 16, 20, 23, 26, 30, 34, 40, 45 mm
With Ø 70 mm subbase and handle. On POM base (204 x 121 x 15 mm).
Compatible with all 5700-

Horotec die in Delrin - new version for MSA07.360-A and MSA07.320
MSA07.360-C


Horotec die in Delrin - new version
This replacement die made of Delrin is designed for Horotec tools MSA07.360-A and MSA07.320. It ensures excellent strength and durability, making it ideal for watchmaking purposes.

Features:
Compatible with: MSA07.360-A and MSA07.320
Material: Delrin
Weight: 0.015 kg
Perfect for precise and repetitive assembly tasks in the watchmaking industry.