Rubber ball to open and close all types of screw-down case backs.

Inflated rubber ball to open and close all types of screw-down case backs. Inexpensive, easy-to-use this case opener allows most watches to be opened and will not leave marks. Ø 67 mm.

ASSORTMENT OF STEEL DIES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE BR, 6 PIECES / Ø 34 - 35 - 35.5 - 36 - 37 - 38 mm

Universal brass tool to remove glasses from Ø 10 to 45 mm, delivered with standard plate, 0.70 mm thickness
Reference : 4266
Swiss made Top seller
Removes and inserts immediately, crystals without dis-assembling the watch.
Will not damage the crystal.
For any unbreakable ­crystal without tension ring.
Useful for removing immediately a watch glass for:
- replacing the glass
- steam removing
- getting at the hands.

STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, Ø INT. 30.60 / Ø EXT. 40 mm

RACK-PRESS FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, VERSION RED SUCTION DIES

The press is equipped with two handles that can be declutched to facilitate their positioning according to the desired angle :
(1) Lateral handle allows to lower or to lift the toothed rack in order to have a better control of the pressure applied to the
case back during unscrewing/screwing ;
(2) Upper handle (mobile) is used to unscrew/screw the case back.

Compatible with all HOROTEC® dies and case holders, see pages 07-25...07-28 and 07-30...07-32.

The press is equipped with two handles that can be declutched to facilitate their positioning according to the desired angle :
(1) Lateral handle allows to lower or to lift the toothed rack in order to have a better control of the pressure applied to the
case back during unscrewing/screwing ;
(2) Upper handle (mobile) is used to unscrew/screw the case back.

Contents :

07.367-P Rack-press 4.000
07.367-A (3) Red suction case holder 0.130
07.333 (4) Assortment of 7 red suction dies 0.140

Spare part :

07.367-R Lateral spring for press, Ø 18 x H 13 mm 0.005

STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, Ø INT. 35.55 / Ø EXT. 45 mm

PIN PUNCH SUPPORT FOR PRESSES MSA07.367 /07.368 /.07.369, STAINLESS STEEL / Ø 8 x L35 mm

PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, CARBON COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.

Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, GRAFFITI COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.

Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth

PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, GRAFFITI COLOUR

Small sized press, suitable for screw-on and snap-on dies.

Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, MAGMA COLOUR
Small sized press, suitable for screw-on and snap-on dies.

Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, MAGMA COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.

Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

Small sized press, suitable for screw-on and snap-on dies.

Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity

PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, WITH 12 SCREW-ON DIES MSA07.104 / USE WITH SNAP-ON DIES + SUPPORT FOR CLOSED BAND MSA07.160-A

Rubber red ball to open and closed all types watch's case backs, Ø 67 mm

Rubber red ball to open and closed all types watch's case backs, Ø 67 mm

Reversible Stake Under with Straight Edges in Metal for press tool Ø 34/36 mm

Reversible Stake with Straight Edges in Metal for press tool, Ø 50/52 mm