Fixed steady for longer work piece 24010
Fixed steady for longer work pieces
Especially for boring. Also required if the tailstock cannot be used to "counter". Up to Ø 40mm.
Fixed steady for longer work pieces
Especially for boring. Also required if the tailstock cannot be used to "counter". Up to Ø 40mm.
STANDARD BENCH, TOP 122x60 cm / HEIGHT ADJUSTMENT BY SCREWS AND NUTS 85...110 cm / FIXED ARMRESTS / REAR PANEL / 1 CABINET
PRESS FOR FITTING/REMOVING BRACELET PINS, GRAFFITI COLOUR
Press for rapidly fitting and removing the bracelet pins and screws.
Stand accessories easily accessible.
The vertical guide allows a perfect alignment with bracelet screws and pins.
It is equipped with a device that holds the pins holder, leaving the operator hands free.
Contents :
– 1 press and 1 broach MSA10.500-A
– 1 bracelet holder MSA10.501
– 6 pin punche MSA10.503-xxx : Ø 0.40, 0.60, 0.80, 1.00, 1.50 and 2.00 mm
– 1 support MSA10.500-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1Adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
Press for rapidly fitting and removing the bracelet pins and screws.
Stand accessories easily accessible.
The vertical guide allows a perfect alignment with bracelet screws and pins.
It is equipped with a device that holds the pins holder, leaving the operator hands free.
Contents :
– 1 press and 1 broach MSA10.500-A
– 1 bracelet holder MSA10.501
– 6 pin punche MSA10.503-xxx : Ø 0.40, 0.60, 0.80, 1.00, 1.50 and 2.00 mm
– 1 support MSA10.500-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
MINI-PRESS WITH WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, CARBON COLOUR
Mini professional precision press. Small and robust, built in steel and aluminium.
Equipped with removable and adjustable watch holder with 4 Delrin® dies to hold the watch cases surely and horizontally.
First fit the case in the watch holder and then unscrew the case back with the adjustable jaws holder.
Excellent frontal, lateral or plunging view.
Top wheel Ø 75 mm.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 gasket for broach MSA07.320-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, MAGMA COLOUR
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
MINI-PRESS WITH WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, MAGMA COLOUR
Mini professional precision press. Small and robust, built in steel and aluminium.
Equipped with removable and adjustable watch holder with 4 Delrin® dies to hold the watch cases surely and horizontally.
First fit the case in the watch holder and then unscrew the case back with the adjustable jaws holder.
Excellent frontal, lateral or plunging view.
Top wheel Ø 75 mm.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 gasket for broach MSA07.320-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS FOR FITTING/REMOVING BRACELET PINS, MAGMA COLOUR
Press for rapidly fitting and removing the bracelet pins and screws.
Stand accessories easily accessible.
The vertical guide allows a perfect alignment with bracelet screws and pins.
It is equipped with a device that holds the pins holder, leaving the operator hands free.
Contents :
– 1 press and 1 broach MSA10.500-A
– 1 bracelet holder MSA10.501
– 6 pin punche MSA10.503-xxx : Ø 0.40, 0.60, 0.80, 1.00, 1.50 and 2.00 mm
– 1 support MSA10.500-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, GRAFFITI COLOUR
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, GRAFFITI COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, CARBON COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS FOR FITTING/REMOVING BRACELET PINS, CARBON COLOUR
Press for rapidly fitting and removing the bracelet pins and screws.
Stand accessories easily accessible.
The vertical guide allows a perfect alignment with bracelet screws and pins.
It is equipped with a device that holds the pins holder, leaving the operator hands free.
Contents :
– 1 press and 1 broach MSA10.500-A
– 1 bracelet holder MSA10.501
– 6 pin punche MSA10.503-xxx : Ø 0.40, 0.60, 0.80, 1.00, 1.50 and 2.00 mm
– 1 support MSA10.500-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
Small sized press, suitable for screw-on and snap-on dies.
Contents :
– 1 assortment of 12 screw-on dies MSA07.104
– 1 press MSA07.130
– 1 upper adaptor for screw-on dies MSA07.130-A
– 1 reversible lower adaptor for screw-on and snap-on dies MSA07.130-B
– 1 broach with wheel MSA07.130-C
– 1 packaging box
– 1 certificate of authenticity
Mini professional precision press. Small and robust, built in steel and aluminium.
Equipped with removable and adjustable watch holder with 4 Delrin® dies to hold the watch cases surely and horizontally.
First fit the case in the watch holder and then unscrew the case back with the adjustable jaws holder.
Excellent frontal, lateral or plunging view.
Top wheel Ø 75 mm.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 gasket for broach MSA07.320-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
PRESS WITH LARGE WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, MAGMA COLOUR
Professional precision press, heavy and robust for opening/closing screw-on case backs of all types of watches.
Large ergonomic top wheel Ø 160 mm for screwing/unscrewing with no effort.
Centre threaded broach with precise blocking ring.
Solid steel supporting pillars covered with anti-skid and ergonomic synthetic material, for right and left handed.
Base equipped with 4 anti-skid feet.
Contents :
– 1 adjustable jaws holder MSA07.344, maximum opening 65 mm
– 2 round jaws MSA07.323-A
– 2 flat jaws MSA07.323-B
– 2 square jaws MSA07.323-C
– 2 knurled jaws MSA07.323-D
– 1 adjustable case holder with 4 Delrin® dies MSA07.360-A
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.
MINI BENCH, SOLID OAK TOP AND ADJUSTABLE ALCANTARA ARMRESTS