ADJUSTABLE CASE HOLDER FOR MSA07.367 /07.369, WITH 4 DE
ADJUSTABLE ALUMINIUM CASE HOLDER FOR MSA07.367 /07.369, WITH 4 DELRIN DIES
Filter By
Categories
Categories
Price
Price
€3.00 - €3,974.00
Brand
Brand
Utilisez l'éditeur en back-office pour mettre en avant un produit depuis votre sidebar
Active filters
ADJUSTABLE ALUMINIUM CASE HOLDER FOR MSA07.367 /07.369, WITH 4 DELRIN DIES
MINI-PRESS WITH WHEEL FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, WITH ADJUSTABLE CASE HOLDER AND JAWS HALTER / 4 PAIRS OF JAWS
PRECISION PRESS FOR CASE BACKS /CRYSTALS /BEZELS, WITH 43 SCREW-ON DIES MSA06.520 /.521 /.522 /07.106
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, WITH 6 SNAP-ON DIES MSA07.111
PRESS FOR CLOSING CASES WITH SNAP-ON BACKS, WITH 9 SCREW-ON DIES MSA07.106
ADJUSTABLE JAWS HOLDER FOR PRESSES MSA07.050 /07.320 /07.36x, MAXIMUM OPENING 65 mm
Horotec® hands fitting press
HOROTEC
Hands fitting press, 4 broaches.
Delivered with stakes equipped with PEEK tips (doesn’t mark the hands).
For hands : hours (Ø 1.35 mm), minutes (Ø 0.95 mm), seconds (Ø 0.30 mm) and 1 decentred stake.
Size : 160 x 100 x 130 mm.
ASSORTMENT OF STEEL DIES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, 4 PIECES / Ø 30 - 35 - 39 - 42 mm
4-pin stem for fitting the needles
Interchangeable plastic cleats.
Base: Ø 31 mm. Precise pin guidance.
High positioning accuracy.
Rack-press delivered as a complete version, for traditional
work or only with the suction dies. Equipped with 2
adapters allowing use of all the dies with thread Ø 6 mm
from the following assortments: MSA06.520, 06.521,
06.522, 07.106 and 07.107
RACK-PRESS FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS, LIGHT VERSION
STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, Ø INT. 30.60 / Ø EXT. 40 mm
STEEL DIE WITH 12 SIDES FOR OPENING/CLOSING CASES WITH SCREWED-ON BACKS TYPE PAN, Ø INT. 35.55 / Ø EXT. 45 mm
Device for fitting glasses and snap-on case backs
Reference : 8250
Swiss made
• Anodized aluminum frame with non-slip base
• Linear spindle with anti-rotation
• Spoked handwheel Ø 100 mm
• Spindles and dies holders with M6 thread
• Free height : ~ 60 mm
• Compatible with Dies from the range N° 5499, N° 5500, N° 7499 and N° 6527
• Supplied with : die holder N ° 5500-T21, height 21 mm
• Optional : die holder N° 5500-T05, height 5 mm and N° 5500-T28 height 28 mm
Hands removing press, without contact with the dial.
This press allows removing safely the hands fitted on a dial, making
possible the extraction of hands without damaging the dial
Contents :
- 1 press 05.129-01
- 1 hand tool 05.128-02
- 1 base for extractors and pins 05.129-02
- 1 plate
- 3 extractors 05.129-060, 05.129-150 and 05.129-250
- 3 pins 05.128-015, 05.128-060 and 05.128-100.
Other sizes of extractors upon request.
Hands removing press, without contact with the dial.
This press allows removing safely the hands fitted on a dial, making
possible the extraction of hands without damaging the dial.
Spare parts :
05.129-01 Press 0.660
05.129-02 Base 0.090
05.128-02 (1) Hand tool 0.020
05.128-015 Pin with spring Ø 0.15 mm 0.002
05.128-060 (2) Pin with spring Ø 0.60 mm 0.002
05.128-100 Pin with spring Ø 1.00 mm 0.002
05.129-060 (3) Hands extractor, notch 0.60 mm 0.003
05.129-150 Hands extractor, notch 1.50 mm 0.003
05.129-250 Hands extractor, notch 2.50 mm 0.003
Optional extractors with columns :
05.128-B Hands extractor with columns, 0.60 x 3.80 mm 0.003
05.128-C Hands extractor with columns, 1.45 x 3.80 mm 0.003
05.128-D Hands extractor with columns, 2.10 x 4.70 mm 0.003
Optional extractors without columns :
05.129-060C Counter hands extractor, notch 0.60 mm 0.003
05.129-200 Hands extractor, notch 2.00 mm 0.003
PRESS FOR RIVETING AND MILLING DELIVERED IN BOX (FULL VERSION), 89 PUNCHES, 2 MILLING POINTS, 6 STAKES, 4 CHUCKS P4.5, 2 LOCKNUTS, 1 ROD FOR BROACH AND 2 HEX KEYS
PIN PUNCH SUPPORT FOR PRESSES MSA07.367 /07.368 /.07.369, STAINLESS STEEL / Ø 8 x L35 mm
Hands removing press with fine adjustment, without contact with the
dial.
This press allows removing safely the hands fitted on dial,
guaranteeing their extraction without damaging the dial.
Contents :
- 1 press MSA05.131-P
- 1 hand tool MSA05.128-02
- 1 base MSA05.129-02 for extractors and pins
- 5 extractors MSA05.129-060, MSA05.129-060C, MSA05.129-150,
MSA05.129-200 and MSA05.129-250
- 3 pins MSA05.128-015, MSA05.128-060 and MSA05.128-100.