Tool for laying and removing spring bars with tip and fine fork.
Stainless steel body with special profile.
Length: 145 mm

Accessories
Supports
Dimensions: 53 x 53 x 26 mm.
Spaces to eject pins. To be used
with press No 7745-100, No 6745
and tooling No 6744.
No 6744-P Slots size: 2.2 - 2.6 - 3.0 -
3.4 -3.8 - 4.0 mm.

In nickel-plated brass. Ø 35 mm

TOOL FOR OPENING THE DIAL BOLTS (FASTENER SPLIT PIN)

TOOL FOR OSCILLATING WEIGHT BOLTS, CALIBRE RX 3235

FORK FOR BLACK TOOL FOR SPRING BARS MSA10.009, HARDENED STAINLESS STEEL / WIDTH 1.30 x THICKNESS 0.30 mm

BLACK TOOL FOR SPRING BARS WITH 2 FORKS MSA10.009-B (WIDTH 1.10 x THICKNESS 0.23 mm), L130 mm

STAINLESS STEEL FLEXIBLE RULE, DOUBLE SIDED / 200 mm / 0.5-1 mm

ASSORTMENT OF PIN PUNCH TOOLS FOR REMOVING THE BRACELET PINS, 3 PIECES / Ø 0.70 - 0.80 - 1.00 mm
Contents :
- 1 pin punch tool MSA10.528-070 with nickel plated
brass handle Ø 5 mm, Ø 0.70 mm
- 1 pin punch tool MSA10.528-080 with nickel plated
brass handle Ø 5 mm, Ø 0.80 mm
- 1 pin punch tool MSA10.528-100 with nickel plated
brass handle Ø 5 mm, Ø 1.00 mm.

PIN PUNCH TOOL WITH ANODISED BRASS HANDLE AND STAINLESS STEEL ANVIL, WITH 11 PIN PUNCHES MSA10.503-040 ... MSA10.503-200
Contents :
- 1 handle MSA10.527 compatible with all pin punches
MSA10.503-x
- 11 pin punches MSA10.503-x : Ø 0.40, 0.60, 0.70,
0.80, 0.90, 1.00, 1.10, 1.20, 1.40, 1.50 and 2.00 mm

HARDENED STEEL ELECTRONIC CALIPER, MEASURING RANGE 150 mm - 6 in / PRECISION 0.01 mm - 0.0005 in

Largeur des rainures: 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0 mmIn "SOFT" synthetic material.

Largeur des rainures: 2.2, 2.6, 3.0, 3.4, 3.8, 4.0 mmIn "SOFT" synthetic material.

Assortment of 17 mainspring winders for left hand and right hand mainsprings

Hands, cannon pinions, sweep wheels and chronograph driving wheel remover.For removing wheels on third wheel arbors and for chronograph driving wheels with 6 spokes.Red handle

ANALOGUE DIAL GUAGE ON HORIZONTAL SUPPORT JFK FEINTASTER, MEASURING RANGE 10 mm / PRECISION 0.01 mm

ASSORTMENT OF PIN PUNCHES, Ø 0.40 - 0.60 - 0.70 - 0.80 - 1.00 - 1.10 - 1.20 - 1.40 - 1.50 - 2.00 / SHANK Ø 2.00 mm / 10 PIECES

ASSORTMENT OF PIN PUNCHES, Ø 0.40 - 0.60 - 0.80 - 1.00 - 1.50 - 2.00 / SHANK Ø 2.00 mm / 6 PIECES

PRESS FOR FITTING/REMOVING BRACELET PINS, CARBON COLOUR
Press for rapidly fitting and removing the bracelet pins and screws.
Stand accessories easily accessible.
The vertical guide allows a perfect alignment with bracelet screws and pins.
It is equipped with a device that holds the pins holder, leaving the operator hands free.

Contents :
– 1 press and 1 broach MSA10.500-A
– 1 bracelet holder MSA10.501
– 6 pin punche MSA10.503-xxx : Ø 0.40, 0.60, 0.80, 1.00, 1.50 and 2.00 mm
– 1 support MSA10.500-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.

PRESS FOR FITTING/REMOVING BRACELET PINS, GRAFFITI COLOUR
Press for rapidly fitting and removing the bracelet pins and screws.
Stand accessories easily accessible.
The vertical guide allows a perfect alignment with bracelet screws and pins.
It is equipped with a device that holds the pins holder, leaving the operator hands free.

Contents :
– 1 press and 1 broach MSA10.500-A
– 1 bracelet holder MSA10.501
– 6 pin punche MSA10.503-xxx : Ø 0.40, 0.60, 0.80, 1.00, 1.50 and 2.00 mm
– 1 support MSA10.500-C
– 1 packaging box
– 1 certificate of authenticity
– 1 cleaning cloth.