4-pin stem for fitting the needles

Interchangeable plastic cleats.
Base: Ø 31 mm. Precise pin guidance.
High positioning accuracy.

Hands removing press, without contact with the dial.
This press allows removing safely the hands fitted on a dial, making
possible the extraction of hands without damaging the dial

Contents :

- 1 press 05.129-01
- 1 hand tool 05.128-02
- 1 base for extractors and pins 05.129-02
- 1 plate
- 3 extractors 05.129-060, 05.129-150 and 05.129-250
- 3 pins 05.128-015, 05.128-060 and 05.128-100.
Other sizes of extractors upon request.
Hands removing press, without contact with the dial.
This press allows removing safely the hands fitted on a dial, making
possible the extraction of hands without damaging the dial.

Spare parts :

05.129-01 Press 0.660
05.129-02 Base 0.090
05.128-02 (1) Hand tool 0.020
05.128-015 Pin with spring Ø 0.15 mm 0.002
05.128-060 (2) Pin with spring Ø 0.60 mm 0.002
05.128-100 Pin with spring Ø 1.00 mm 0.002
05.129-060 (3) Hands extractor, notch 0.60 mm 0.003
05.129-150 Hands extractor, notch 1.50 mm 0.003
05.129-250 Hands extractor, notch 2.50 mm 0.003

Optional extractors with columns :


05.128-B Hands extractor with columns, 0.60 x 3.80 mm 0.003
05.128-C Hands extractor with columns, 1.45 x 3.80 mm 0.003
05.128-D Hands extractor with columns, 2.10 x 4.70 mm 0.003

Optional extractors without columns :

05.129-060C Counter hands extractor, notch 0.60 mm 0.003
05.129-200 Hands extractor, notch 2.00 mm 0.003

Hands removing press with fine adjustment, without contact with the
dial.
This press allows removing safely the hands fitted on dial,
guaranteeing their extraction without damaging the dial.
Contents :
- 1 press MSA05.131-P
- 1 hand tool MSA05.128-02
- 1 base MSA05.129-02 for extractors and pins
- 5 extractors MSA05.129-060, MSA05.129-060C, MSA05.129-150,
MSA05.129-200 and MSA05.129-250
- 3 pins MSA05.128-015, MSA05.128-060 and MSA05.128-100.

Setting tool with 1 runner for hands
Reference : 8935-1
Swiss made
Device for precise and controlled setting of watch hands.

• Anodised aluminium structure
• Stakes made of synthetic material, quick-change
• Base Ø 31 mm
• Enhanced guidance of the spindles
• Precision alignment spindles / base
• Compatible with movement holders Bergeon N° 7100 and with the B-Force N° 8935-KCF, power sensor device

Setting tool in anodized aluminum, with 3 runners hands for watchmaker's
Reference : 8935-3
Swiss made Top seller
Device for precise and controlled setting of watch hands.

• Anodised aluminium structure
• Stakes made of synthetic material
• Base Ø 31 mm
• Enhanced guidance of the spindles
• Precision alignment spindles / base
• Compatible with movement holders Bergeon N° 7100 and with the B-Force N° 8935-KCF, power sensor device

Set of 5 Peek stakes for hands
Reference : 6935-TP
Swiss made
For setting tools 6012, 8935 and hand setting tools 8404-16.

Stakes
6935-TP060: grey, ØA 1.70 mm, ØB 0.60 mm
6935-TP120: red, ØA 2.10 mm, ØB 1.20 mm
6935-TP160: yellow, ØA 2.60 mm, ØB 1.60 mm
6935-TPL150: blue, undrilled, ØA 1.50 mm
6935-TPL260: black, undrilled, ØA 2.60 mm
The Ø 2.60 mm is to be amended by the end-user according to his needs

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, SECONDS HANDS / FLAT

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, Ø EXT. 3.00 - INT. 0.85 mm

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, DATE HANDS / HOLE Ø 1.50 mm

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, Ø EXT. 3.00 - INT. 1.65 mm

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, Ø EXT. 3.00 - INT. 1.80 mm

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, Ø EXT. 3.00 - INT. 0.55 mm

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, Ø EXT. 3.00 - INT. 1.25 mm

STEEL STAKE WITH PEEK TIP FOR PRESSES MSA05.050 /05.114 ...05.117, Ø EXT. 3.00 - INT. 1.95 mm

Setting tool in anodized aluminum, with 5 runners hands for watchmaker's
Anodised aluminium structure
• Stakes made of synthetic material
• Base Ø 31 mm
• Enhanced guidance of the spindles
• Precision alignment spindles / base
• Compatible with movement holders Bergeon N° 7100 and with the B-Force N° 8935-KCF, power sensor device